Keeping you in the paddock,
or on the road.

Call to book ›
← All services

Diesel diagnostics in Mildura

Does your diesel ute start first turn when it’s warm but struggle on a cold morning? Does your tractor idle smoothly, then surge when the implement goes to work? At Mallee Auto & Agricultural Services in Mildura, we start with when the fault happens and use that information to decide what to test.

What’s your diesel doing?

Utes parked outside a mechanical workshop

Cars, utes and 4WDs

Long cranking, an uneven idle, a warning light or a sudden loss of pulling power are all reasons to book a diagnostic assessment. If your ute drives normally around town but loses power towing uphill, that detail helps us plan the test.

Mechanic beside a tractor and service vehicle in a paddock

Tractors and working machinery

A machine may idle smoothly in the yard yet surge, hesitate or cut out under load. Tell us what job it was doing, how long it had been running and whether the fault cleared when the load came off. For a machine stopped on site in Sunraysia, call us to discuss field service.

How we trace a diesel fault

Diagnostic scan tool showing live data as a graph
  1. Record the symptoms. We ask about recent servicing, filter changes and the conditions that bring the problem on. For an intermittent fault, the sequence of events can be as useful as the warning on the dash.
  2. Read the codes and check live data. Where the vehicle supports it, we compare what the engine computer is requesting with what the sensors report. For example, a difference between requested and measured fuel pressure gives us a specific lead to investigate.
  3. Test the likely cause. Depending on the symptoms, that may mean checking fuel supply and filtration, boost hoses, or a sensor and its wiring. A fault code helps direct those checks. On its own, it doesn’t tell us which part needs replacing.
  4. Talk through the findings. We explain what we found, whether further testing is needed and what we recommend before you decide on repairs.

Booking a diesel diagnostic assessment

For a vehicle, include the make, model, year and kilometres. For machinery, include the make, model, serial number, engine hours and site location. A photo of the dash message or the exact fault code is helpful if you already have one.

If the fault only happens on the first start of the day, mention it when booking so we can arrange to assess the engine cold.